10 Upton Drive, Wilmington, MA 01887
Toll Free 800-657-7704
Laboratory Air HandlingWater TreatmentMarine Architectural Lighting Design Home

 

 

Lighting Design
Learn More
   
  Architectural
Learn More
 

 

Marine
Learn More
 

 

Water Treatment
Learn More
 
  Air Handling
Learn More
 
  Laboratory
Learn More

Founded in 1968, PolyFab provides custom engineered plastic fabrications.

We work with many materials and specialize in clear plastics.

Some of the applications we have made include:

  • Large graduated cylinders
  • Architectural formed pieces
  • LEXAN® Tanks and waterbaths
  • Clear PVC and acrylic assemblies
  • Laboratory splash guards and custom trays for all industries
  • Plastic flooring and secondary containment basins
  • Custom PVC, CPVC, polypropylene and HDPE duct work
  • Fume hoods made from any weldable plastic material
  • Marine fresh, gray, and black water tanks
  • Custom polypro and HDPE tanks for chemical storage and treatment
  • Machined polyethylene fittings
  • Routed plastic and wood signs

Click on the navigation to the left for specific product photos, and along the top for application-specific photos and information. We look forward to being of service to you!

CPVC Wye

Solvent Cement Plastic Pipe Joints. Plastic pipe and fittings designed to be joined by solvent cementing shall comply with appropriate IAPMO Installation Standards.
ABS pipe and fittings shall be cleaned and then joined with listed solvent cement(s).
CPVC pipe and fittings shall be cleaned and joined with listed primer(s) and solvent cement(s).
The return vent shall be connected to the horizontal drain through a wye-branch fitting and shall, in addition, be provided with a foot vent taken off the vertical fixture vent by means of a wye-branch immediately below the floor and extending to the nearest partition and then through the roof to the open air or may be connected to other vents at a point not less than 6& (152.4 mm) above the flood level rim of the fixtures served. Drainage fittings shall be used on all parts of the vent below the floor level and a minimum slope of 1/4& per foot (21 mm/m) back to the drain shall be maintained. The return bend used under the drainboard shall be a one piece fitting or an assembly of a 45°, a 90°, and a 45° elbow in the order named. Pipe sizing shall be as elsewhere required in this Code.

Credit: CPVC Wye

CPVC WyePlease Contact Us to discuss your CPVC Wye needs. You design it, we build it.

  • Exhaust Ventilation Router
  • CNC Router Wilmington MA
  • Acrylic Fabrication
  • Laminar Flow Hood
  • Cylinder Graduated Reading
  • Fume Hood Laboratory
  • Grillwork
  • Polyethylene Duct
  • Chemical Fume Hood
  • HDPE Tank
  • Plastic Flange
  • CNC Routing Services MA
  • HDPE Duct
  • Water and Air Treatment Home
  • Exhaust Ventilation System
  • CNC Router Services Boston
  • CPVC Duct
  • Fume Hood Mfg
  • Exhaust Fume Hood
  • Flange Plastic
  • Plastic Flange Bearing
  • Industrial CNC Routing Massachusetts
  • Lexan Fabrication
  • Acid Fume Hood
  • Fume Hood Manufacturer
  • Laminar Air Flow Hood
  • PVC Duct Fittings
  • Uhmw Machining
  • Fume Hood Labconco
  • Cylinder Diagram Graduated
  • PVC Cone
  • Acrylic Cone
  • Benchtop Fume Hood
  • Lexan Machining
  • Walk In Fume Hood
  • HDPE Coupling
  • Large PVC Duct
  • Drape Forming
  • Clear Polycarbonate Pipe
  • CPVC Wye
  • Plastic Fume Hood
  • PE Flanges
  • CNC Routing Massachusetts
  • Polyethylene Flange
  • PE Coupling
  •